Part Number Hot Search : 
CDEP134 1680885 B72205 PP2341 CX162 TEA5705 TTINY AX3102
Product Description
Full Text Search
 

To Download U833BS Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 U833BS / U833BSE
1.3-GHz Prescaler for PLLs in TV, CATV and SAT TV Tuners
Technology: Bipolar
Features
D D D D
U833BS ECL output stage U833BSE emitter follower output stage 3 scaling factors 64/128/256 programmable at Pin 5 High input sensitivity
D D D D
Low output impedance Low power consumption Pin-compatible to the U6xxB series except Pin 5 Electrostatic protection according to MIL-STD. 883
Case
8-pin dual-inline plastic 8-pin SO plastic 6-pin SIP plastic (U833BS, U833BSE) (U833BS-FP, U833BSE-FP) (U833BS-SP, U833BSE-SP)
Absolute Maximum Ratings
Reference point Pin 4 (1) Parameters Supply voltage Pin 8 (4) Input-voltage range Pin 2, 3, 5 (2, 5, 6) Junction temperature Storage-temperature range Ambient-temperature range Symbol VS Vi Tj Tstg Tamb Value 6 0 to VS 125 -40 to +125 -25 to +70 Unit V V C C C
Maximum Thermal Resistance
Parameters Junction ambient DIP8 SIP6 SO8 Symbol RthJA RthJA RthJA Maximum 100 100 175 Unit K/W K/W K/W
Note: The device is self-oscillating without input signal
TELEFUNKEN Semiconductors Rev. A1, 05-Sep-96
1 (7)
U833BS / U833BSE
Block Diagram
Figure 1.
Pin Connection (DIP8, SO8)
Pin 1 2, 3 4 5 6, 7 8 Function Not connected Input Ground Switch 64/128/256 Output VS
Pin Connection (DIP8, SO8)
Pin 1 2 3 4 5, 6 Function Ground Switch 64/128/256 Output VS Input
Note: Pin numbers without brackets apply to DIP8 and SO8 package, Pin numbers with brackets to SIP6 RMS voltage calculated from the available power measured
2 (7)
TELEFUNKEN Semiconductors Rev. A1, 05-Sep-96
U833BS / U833BSE
Electrical Characteristics
VS = 4.5 to 5.5 V, Tamb = 0 to +70 C, referred to test circuit, unless otherwise specified Parameters Supply current 1) Input sensitivity 2) Test Conditions / Pin VS = 5 V Pin 8 (4) RG = 50 W fi = 70 to 1000 MHz Pin 2, 3 (5, 6) fi = 1000 to 1300 MHz Pin 2, 3 (5, 6) RG = 50 W Pin 2, 3 (5, 6) Symbol IS Min Typ 40 Max 50 Unit mA
Vi
10
mV
Vi Vi fimin fimax 300
20
mV mV
Large-signal compatibility Frequency range Output stage a. Balanced ECL output Voltage swing each output Output impedance b. Emitter follower Voltage swing each output Output impedance Switching voltage for
70 1300
MHz MHz
RL = 10 k//13 pF Pin 6, 7 (3) Pin 6, 7 (3) RL = 10 k//13 pF Pin 6, 7 (3) Pin 6, 7 (3) ./. 64 Pin 5 (2) ./. 128 Pin 5 (2) ./. 256 Pin 5 (2)
VO ZO
0.8 500
Vpp
W W
V V
VO ZO VSF VSF VSF
1 200 open VS -0.5 0 0.5
Vpp
TELEFUNKEN Semiconductors Rev. A1, 05-Sep-96
3 (7)
U833BS / U833BSE
Test Circuits
Figure 2.
Figure 3.
4 (7)
TELEFUNKEN Semiconductors Rev. A1, 05-Sep-96
U833BS / U833BSE
Output Circuits
Figure 4.
Figure 5.
TELEFUNKEN Semiconductors Rev. A1, 05-Sep-96
5 (7)
U833BS / U833BSE
Dimensions in mm
Package: DIP8
Package: SO8
Package: SIP8
6 (7)
TELEFUNKEN Semiconductors Rev. A1, 05-Sep-96
U833BS / U833BSE
Ozone Depleting Substances Policy Statement
It is the policy of TEMIC TELEFUNKEN microelectronic GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances ( ODSs). The Montreal Protocol ( 1987) and its London Amendments ( 1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. TEMIC TELEFUNKEN microelectronic GmbH semiconductor division has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2 . Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency ( EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C ( transitional substances ) respectively. TEMIC can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances.
We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use TEMIC products for any unintended or unauthorized application, the buyer shall indemnify TEMIC against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. TEMIC TELEFUNKEN microelectronic GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 ( 0 ) 7131 67 2831, Fax number: 49 ( 0 ) 7131 67 2423
TELEFUNKEN Semiconductors Rev. A1, 05-Sep-96
7 (7)


▲Up To Search▲   

 
Price & Availability of U833BS

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X